The FLUX Beam Air is a four-layer filtration system that captures 99.9% of PM2.5 particles produced during laser cutting and engraving, letting FLUX laser owners run their machines indoors without venting through a window. Its 350 CFM (9,800 L/min) maximum airflow pulls smoke and fumes through a pre-filter, medium efficiency filter, HEPA filter, and activated charcoal filter — each stage independently replaceable on its own service schedule.
Airflow is adjustable to balance extraction power against noise, and smart automation syncs the Beam Air's power state with FLUX laser cutters over USB-B, switching it on and off with the laser. At 18.50" x 10.24" x 19.29" (470 x 260 x 490 mm) and 48.5 lbs (22 kg) with built-in wheels, it fits wherever the laser goes. FLUX recommends it as the best match for the Ador, beamo, and Beambox Series, and it works with any laser cutter with a standard 10 cm (3.94") outlet.
Genuine FLUX Machine
Lowest Price Guarantee
99.9% of PM2.5 Captured
Fits Any 10 cm Outlet Laser
0% APR Financing via Affirm
Talk to a Human: 847-971-5099
Why the Beam Air
Powerful 4-Layer Filtration
A pre-filter, medium efficiency filter, HEPA filter, and activated charcoal filter work in sequence to capture 99.9% of PM2.5 particles from laser cutting fumes.
350 CFM Maximum Airflow
Moves up to 9,800 L/min of air, pulling smoke and fumes out of the laser enclosure fast enough to keep pace with heavy cutting jobs.
Smart Auto Power Sync
A USB-B connection to FLUX laser cutters switches the Beam Air on and off automatically with the laser — no separate power management needed.
Independently Replaceable Filter Stages
Each layer swaps on its own schedule — pre-filter 10–30 hours, medium efficiency 50–150 hours, HEPA 100–300 hours, activated charcoal 300–600 hours — so you only replace what's spent.
Adjustable Quiet Operation
Airflow is customizable, letting you dial in the right balance of extraction power and low noise for your workspace.
Compact and Mobile
The space-saving footprint and built-in wheels make it easy to tuck beside a laser or roll anywhere in the workshop. It draws just 180W.
What's Included
In the Box
FLUX Beam Air Fume Extractor
Pre-filter, medium efficiency filter, HEPA filter, and activated charcoal filter
Replacement HEPA filters are sold separately on this site. Call 847-971-5099 and we will confirm the exact box contents before you order.
FLUX Beam Air Fume Extractor
Figures below are from FLUX's published specifications for this model.
Size
18.50" x 10.24" x 19.29" (470 x 260 x 490 mm)
Weight
48.5 lbs (22 kg)
Power
180 W
Inlet Diameter
3.94" (100 mm)
Max Flow
350 CFM (9,800 L/min)
Filtration
4-layer system capturing 99.9% of PM2.5 particles
Pre-Filter Replacement (Est.)
10 - 30 hours
Medium Efficiency Filter Replacement (Est.)
50 - 150 hours
HEPA Filter Replacement (Est.)
100 - 300 hours
Activated Charcoal Filter Replacement (Est.)
300 - 600 hours
Smart Automation
Auto power sync with FLUX laser cutters via USB-B connection
Compatibility
Any laser cutter with a standard 10 cm outlet; best for Ador, beamo, and the Beambox Series
FLUX notes that product specifications are subject to change without notice. Call us at 847-971-5099 if a figure here is decisive for your purchase and we will confirm it against the current datasheet.
A genuine FLUX machine, sold by Crafting Source and covered under FLUX's standard warranty terms. Call 847-971-5099 and we will confirm the coverage details for this item.
Lowest Price Guarantee
Find it cheaper at another authorized FLUX dealer? Call us before you order and we will take care of you.
Help From People Who Sell These Every Day
Call 847-971-5099. We would rather spend ten minutes helping you pick the right setup than process a return later.
FLUX Beam Air Fume Extractor: Frequently Asked Questions
How does the Beam Air filter laser fumes?
Through a 4-layer system — pre-filter, medium efficiency filter, HEPA filter, and activated charcoal filter — that captures 99.9% of PM2.5 particles, with airflow up to 350 CFM (9,800 L/min).
Which laser cutters work with it?
Any laser cutter with a standard 10 cm (3.94") exhaust outlet. FLUX recommends it as the best match for the Ador, beamo, and Beambox Series.
Does it turn on automatically with the laser?
Yes, when paired with a FLUX laser cutter: a USB-B connection enables auto power sync, so the Beam Air switches on and off automatically with the laser.
How often do the filters need replacing?
Each layer has its own estimated interval: pre-filter every 10–30 hours, medium efficiency every 50–150 hours, HEPA every 100–300 hours, and activated charcoal every 300–600 hours. Actual intervals vary with materials and workload.
Can it be moved around a workshop?
Yes. It has a compact 18.50" x 10.24" x 19.29" (470 x 260 x 490 mm) footprint and built-in wheels for easy repositioning.
