Non-Touch Pilot Arc | 55A | Clean Cut 1/2 in at 240V
Arccaptain CUT55 Pro: Pilot Arc Plasma Cutting Up to 3/4 Inch, at Just 11.5 lb
The Arccaptain CUT55 Pro is a no-touch pilot arc plasma cutter that slices cleanly through steel, stainless, aluminum, copper, and other conductive metals. The pilot arc starts the cut without touching the workpiece, which means cleaner cuts, less consumable wear, and the ability to cut through rusted, painted, or expanded metal with ease.
Dual voltage (120V and 240V) gives you flexibility from the garage to the job site. On 240V it delivers a clean cut up to 1/2 inch (12 mm) and a maximum severance cut up to 3/4 inch (20 mm). Bluetooth app connectivity, 2T/4T control, an air-pressure sensor with regulator, and intelligent post-flow round out a smart, easy-to-use package that runs on standard compressed air.
3-Year ARCCAPTAIN Warranty
Lowest Price Guarantee
Genuine ARCCAPTAIN Product
Ships From US Warehouse
0% APR Financing via Affirm
Talk to a Human: 847-971-5099
Why the CUT55 Pro
Pilot Arc, No-Touch Start
The arc starts without touching the workpiece, so you can cut rusted, painted, and expanded metal cleanly with less consumable wear.
Cuts Up to 3/4 Inch
Clean cuts up to 1/2 in (12 mm) and maximum severance cuts up to 3/4 in (20 mm) on 240V, at a 60 percent duty cycle.
Dual Voltage 120V / 240V
35A output on 120V for the garage, the full 55A on 240V for the job site.
Bluetooth App Control
Adjust and monitor cutting settings from your phone with built-in Bluetooth connectivity.
Air-Pressure Sensor and Regulator
Dial in the right pressure with the built-in sensor and regulator. It runs on standard compressed air, no special gas required.
Genuinely Portable at 11.5 lb
One of the lightest 55A cutters you can buy, easy to carry to the work instead of bringing the work to it.
What's Included
In the Box
CUT55 Pro cutting machine
Cutting torch
Consumables
Air hose
Ground clamp
Accessories (just connect your air compressor and start cutting)
Arccaptain CUT55 Pro Pilot Arc Plasma Cutter
Figures below are from Arccaptain's published specifications for this model.
Type
Non-touch pilot arc plasma cutter
Input Voltage
Dual 120V / 240V
Output Current
35A (120V) / 55A (240V)
Clean Cut Thickness
Up to 1/2 in (12 mm) at 240V
Max Severance Cut
Up to 3/4 in (20 mm)
No-Load Voltage
330V
Duty Cycle
60%
Air Supply
Compressed air (built-in pressure sensor and regulator)
Enclosure Class
IP21S
Standard
ANSI / NEMA / IEC 60974-1
Weight
11.5 lb (5.2 kg)
Dimensions
17.8 x 9.6 x 6.1 in
Warranty
3-Year ARCCAPTAIN Manufacturer Warranty
Arccaptain notes that product specifications are subject to change without notice. Call us at 847-971-5099 if a figure here is decisive for your purchase and we will confirm it against the current datasheet.
Covered by Arccaptain's 3-year manufacturer warranty against defects in the machine itself.
Lowest Price Guarantee
Find it cheaper elsewhere? Call us before you order and we will take care of you.
Help From People Who Sell These Every Day
Call 847-971-5099. We would rather spend ten minutes helping you pick the right setup than process a return later.
Arccaptain CUT55 Pro Pilot Arc Plasma Cutter: Frequently Asked Questions
What air supply does it need?
Standard compressed air from a shop compressor. There is no special gas required, and a built-in pressure sensor and regulator help you set the pressure correctly.
Can it cut rusted or painted metal?
Yes. The non-touch pilot arc starts without contacting the workpiece, so rusted, painted and expanded metal cut cleanly, with less consumable wear than touch-start machines.
How thick can it cut?
On 240V, clean cuts up to 1/2 in (12 mm) and severance cuts up to 3/4 in (20 mm). On 120V, output is 35A for lighter material.
